Taleb Group in Doha, Qatar is now hiring for Calibration Technician positions.
Requirements:
• Experience in the calibration field minimum 3 years (Oven- Weight balance - weighing Bridge - Length - Batching plant RM Load cells - Feller Guage
• Diploma in Metrology or any relevant qualifications
Salary: QAR 1800-2000 based on qualification and experience.
Responsibility:
• To receive the instruments for calibration from the customers.
• To check the physical condition of instruments as well as functioning of instrument.
• To verify the qty. and type of instruments received against customer delivery note / memo, if any.
• To prepare Calibration Service Request cum Instrument Receipt Challan
• To issue copy of Calibration service request cum instrument receipt challan to the customer for acknowledgement of receipt of their instruments.
• To paste masking tape on instrument along with the details of; Calibration service request (inward) No. (Job No.) / Serial no. of particular instrument in the inward.
• To place the instruments at the identified area such as “Instrument received for Calibration”.
• To clean the instruments before calibration.
• To clean the instruments with petrol and cotton waste in case of mechanical instruments.
• To keep instrument in the calibration standard room at least for 30 minutes for soaking (To bring instrument in the equilibrium condition of the standard room).
• To start calibration of instruments as per the documented calibration method based on the priority of the calibration.
• To ensure that the calibration methods are available where calibration activities are performed.
• To record the results of calibration in the observation sheet.
• To complete the calibration and to get review and approval of results recorded in the observation sheet from the Technical Manager.
• To calculate uncertainty of measurement for the instruments calibrated as requested by the customer.
• To enter the data of the observation sheet in the computer and prepare calibration certificate.
• To get review and approval of the calibration certificate through Technical Manager / Chief Executive Officer.
• To collect photocopies of master’s calibration certificate used for the performing of calibration.
• To attach photocopies of calibration certificates of master along with the calibration certificates and to place all such things in the cover.
• To place instrument at the identified place in the calibration room after completion of calibration.
• To deliver the instruments along with the calibration certificate to the customer.
• To ensure that the proper records are maintained at all stages of calibration and quality assurance activities.
• To prepare daily records of the mechanical / electrical / thermal discipline.
• To handle the instruments throughout the calibration activities in safe and proper manner.
• To monitor the accommodation and environment parameters (Such as Temperature, humidity, noise, illumination, electrical supply, earthing resistance) regularly and to maintain records for the same.
• To analyse the relevant records and to provide feedback to the Technical Manager against the customer complaint, if any.
• To do re–calibration of the instruments as per the Quality assurance schedule.
• To do calibration of the instrument selected for the inter-laboratory comparison and to submit the results of calibration to the Technical Manager.
• To prepare uncertainty budget for all calibration parameters and to ensure that the same is used periodically for uncertainty of measurement.
• To identify the requirements for consumable purchase and forward it to Technical Manager.
• To help Technical Manager on day-to-day activities.
• To report to the Technical Manager on day-to-day functioning.
• To use available resources in an optimum basis.
• To reduce wastage of available resources.
Authority:
• To stop the calibration activities, if proper environment condition is not maintained/achieved.
• To take corrective and preventive actions identified based on analysis, related to the customer complaint or results of calibration.
Application:
Interested Candidates should send their latest Resume/CV with their working history and Education background.