FIROZUDDIN AHMED
Mobile: +917636058442 Email: ahmedfiroz20@rediffmail.com
+919854258517 ahmfiroz@gmail.com
JOB OBJECTIVE: Middle level positions in Process/Project Engineering, Process Design and Development, Technical Services with leading organizations.
PROFESSIONAL PROFILE
Technically accomplished & competent professional with more than 14 years rich experience on Refinery & Petrochemicals, Oil & Gas & Fertilizer industry.
Highlights of the Major project worked:
1. Engineering Manager for Power plant proposal (ORC TURBODEN & Geothermal) work in South East Asia.
2. Commissioning supervisor for SBR plant, ZEON Chemicals, Singapore.
3. Lead Process Engineer for Topping column revamping, PATRON, Malaysia.
4. Lead Process Engineer for EOEG safety study for SHELL, Singapore.
5. Lead Engineer for Feasibility study for site integration of CHEVRON, Singapore.
6. Lead Process Engineer for EOEG column replacement, EGS, SHELL Singapore.
7. Lead Process Engineer for Proposal work of the following:
(i) EOEG plant EPC work, PETRONAS Malaysia.
(ii) LNG regasification FEED work, Thailand.
(iii) Butadiene tank EPC work, Malaysia.
(iv) Poly-butadiene Rubber Plant EPC work, TITAN, Malaysia.
(v) LOBP plant EPC work, SHELL, Singapore.
(vi) Ammonia tank FEED work, VOPAK, Singapore.
(vii) DHT / SGU unit of Refinery, SOCAR, Turkey.
8. Area Process Lead for B2K LNG FEED work, WOOD Group, Australia.
9. Senior Process Engineer for PNG LNG EPC work, EXXON MOBIL, Papua New Guinea.
10. Senior Process Engineer for PNG LNG FEED work, EXXON MOBIL, Papua New Guinea.
11. Process Engineer for BARZAN NGL recovery FEED work, QATAR GAS, Qatar.
12. Process Engineer for EOEG steam balance/column up-gradation work, SHARQ, Saudi Arabia.
13. Deputy Process Manager for construction, pre-commission & commissioning of Crude Distillation/ Visbreaker Unit / Merichem Treaters of grass root refinery, ESSAR OIL, India
14. Engineer for revamping of Ammonia & Urea Plant, BVFCL, India.
ORGANIZATIONAL EXPERIENCE
July’2015 to November’2016
Worked as Engineering Manager/Senior Process Engineer in Mitsubishi Heavy Industry Asia Pacific, SINGAPORE
Feb’2012 to July’2015
Worked as Senior Process Engineer in Chiyoda Singapore Pte Ltd, SINGAPORE
March’2008 to September’2011
Worked as Senior Process Engineer in Chiyoda Corporation, Yokohama, JAPAN
March’2006 to February’2008
Worked as Deputy. Manager (Process) at Essar Oil Refinery, Jamnagar, Gujarat, INDIA
August’2004 to February’2006
Worked as Engineer (Manufacturing) at Haldia Petrochemicals Limited, Haldia, West Bengal, INDIA.
August’ 2002 to July’2004
Worked as Engineer at Brahmaputra Valley Fertilizer Corporation Limited, Namrup, Assam, INDIA
BROAD PERFORMANCE AREAS
Process
Engineering/ Commissioning
? Review/ design activities like preparation/modification of PFD, P&ID, Heat and Mass Balances, Equipment/Instrument datasheets, Line list, Utility Summary, Electrical load list, hazardous area classification etc. for FEED, EPC / EPCM project.
? Cost Estimation and review of ITB deliverables of different engineering discipline.
? Manpower management for junior engineers/designers.
? Philosophies for Design/Operation/Isolation/Control.
? Hydraulic calculation and analysis.
? Hazop Analysis and close-up.
? Design & analysis of safety system (including generate relief loads and size relief valves/ flare header)
? Dynamic simulation for process optimization.
? Knowledge of international codes API, ASME, TEMA, NACE, SHELL DEP, GP & DP of Exxon Mobil, PETRONAS, SABIC, Aramco standards.
? Extensive knowledge of simulation software i.e. Pro II, HYSYS (static and dynamic), Flarenet, Flaresim and PPM.
? Total years of Experience: 14 + years
EPC. FEED, EPCm, Feasibility : 9 years
Pre-comm. & Comm. /Revamping : 5 years
Process software knowledge (few major work)
1. Lead a group of process engineer for the simulation work of topping unit for product slate up gradation using Pro II.
2. Guide/carried out EOEG plant simulation in PRO-II / HYSYS (CO2 removal section, purification section, MEG/DEG/TEG) for RAPID EOEG plant to verify the process design parameter.
3. Guide/lead process engineer for BOG generation for system design of BOG handling system for Cryogenic terminal (Ethylene/Propylene & LNG terminal) with HYSYS.
4. Carried out fractionation section (De-ethanizer, De-propanizer, De-butanizer, and De-pentanizer) simulation work using HYSYS for LNG plant.
5. Lead/Carried out flare header / flare stack design work using ASPEN FLARENET & FLARESIM for Refinery / large LNG plant.
6. Safety/Relief valve sizing & design using PPM
Personal Details
? Date of Birth: 28/02/1976
? Qualification: M.Tech (Petroleum Technology), 2001
Dibrughar University, Assam, INDIA
B.E (Chemical Engineering), 1999
Gauhati University, Assam, INDIA
? Passport No: L2701961
? Nationality: Indian.
? Marital Status : Married
? Notice period: Available immediately.
? Current CTC: SGD 8300/month
? Expected CTC : Negotiable as per location
REFERENCE
1. Mr. Jay Wadhwani,
Senior Vice President Operations, Mitsubishi Heavy Industry Asia Pacific Ltd., Singapore
Former, Vice President Operations, JACOBS Singapore
Contact Number: + 6596437212
+ 6591152708
Email ID: jay_wadhwani@mhiap.com
jhwadhwani@aol.com
2. Mr. Rangnath Dubey.
HoD, Delayed Coker Unit, Takreer Refinery, Abu Dhabi.
Former Vice President, Aditya Birla Group (Chemical division)
Contact Number: +971506616508.
Email ID: rang.dubey@gmail.com
3. Mr. Alfred Freeman Mackey.
Director of Nuclear Projects at Day & Zimmermann.
Email ID: alfred.mackey@dayzim.com