Managing EPC Projects; planning and executing project activities within the area of responsibility; ensuring compliance with QA/QC and HSE requirements.
Providing Development Technology, Commercial and Technical support to the Project Team; working on bidding phase and commercial proposal development.
Reviewing Client technical documentation and requirements; coordinating subcontracted engineering activities and controlling subcontracted engineering documents.
Defining List of Codes, Standards, and Regulatory Requirements, ControlSystem Philosophy, Package Control System Philosophy, Power Supply &Instrument Air Supply Philosophy, Basic Requirements Related to FieldInstruments and Cables, Basic Requirements Related to Installation & RelatedItems, Spare Philosophy
Engineering Skill
Automation System Studies:
The international standard, the procedure for preparation of new drawings, P & ID review, Scope of work, ESD System studies.
Engineering Documents:
Design Basis & Philosophy, Instrument I/O List, Instrument specification sheet (ISS), Instrument installation Schedule (IIS), Instrument mounting and piping details, Instruments points, and line diagram, ILD, Terminals Block diagrams & Interconnection diagrams, Block diagrams, CableSchedules, Junction box details, and Cable tray layout design, Study & Reports, Project Specification, Datasheets & MTO for all Instrumentation equipment.
Engineering Layout Drawings & Standard Installation Details :
Preparation of cable layout, Tray/Rack/Trench/Duct Bank Layout & Sections, cable and conduit schedules, cable tray load Calculation, Instrument Installation and mounting details, instrument piping details. DCS & Instrument panel layout inside the control room. junction box details, Interconnection of JB/Marshaling/DCS, Process Hook-Ups, and Pneumatic Hook-Ups.
Selection & Sizing of various Instruments:
Including control valve, orifice plate, and pressure relief valve using SMART PLANTINSTRUMENTATION (INTOOLs,)
Other Technical Skills:
Vendor Drawing Review, Technical Liaison with Vendors, Interaction with Clients &
Contractors, Coordination with other disciplines, Interdisciplinary review, Support to Procurement team/Technical Bid Evaluation(TBE),
Site Construction Skill:
Complies with Client HSE and Quality initiatives, always aiming for ZeroAccidents and Zero Significant Quality Incidents.
Performing inspections and initiating supporting documentation for all discipline system installations on an ongoing basis.
Providing support to field supervision in establishing requirements for manpower, tools, equipment, and material requirements for a given work evolution.
Developing installation work packages for scopes of work in support of the construction schedule. Preparing short- and long-term schedules and interfacing with the superintendents and other discipline field engineers.
Executing field material takeoffs from "Issued
For
Construction"
drawings. Ensures that work being performed is within the scope of services and within budget.
Providing input to the quantity tracking applications and reporting on weekly installed quantities to Project Controls.
Preparing field material requisitions for equipment and materials and monitoring the status of purchase orders and deliveries.
Assisting field procurement in receipt inspections and reporting of associated equipment and materials and preventive maintenance requirements.
Trouble-shooting the design and resolving issues with engineering and/or fabricator using formal field documentation processes.
Ensuring all installations are per the latest revisions of design drawings, specifications, standards, and codes.
Acting as a point of contact for coordination and resolution of all technical issues related to select subcontractors on-site who provide technical services for the execution of the instrumentation scope of work, including initiating all formal subcontract change documentation to support the subcontract administrator.
Completing and verifying quality documentation per inspection and test plans. Completing and reviewing as-built documentation.
Coordinates with vendors’ specific requirements for pre-commissioning activities at the site.
Attends system walk-downs and ensures the quality of construction and pre-commissioning work by raising and tracking the punch items.
Applies management of change process to the pre-commissioning instrumentation activities. This includes design changes, scope change, produces NCRs/RFIs/FCDs, redlines, and associated rework.
Coordinates with client representatives to obtain approval on work as it is accomplished, as required.
Working Knowledge of Calibration of Instruments, Hardwiring, Testing, and fault Identification
floating of inquiries, Support to Construction team & attending Site EngineeringRequest (SER) & Revising Engineering deliverables in accordance with SER.
KEY PROJECTS HANDLED
ERSAI LLC (SAIPEM, KAZAKHSTAN):
Project 1:
JUDR (Period: Apr 2013 – Jun 2015)
Scope: Acquisition of a new contract, in consortium with KKL for a new Client,‘Teniz Byrgylau’ (A 100% subsidiary of National Company KazMunaiGas JSC) (JUDRproject). The project involved the construction of a ready-to-operate jack-up rig capable of operating in water depths from 5 to 80 meters and of drilling in the Caspian Sea to depths of up to 6,000 meters.
Project 2:
EPC 2, EPC 3 project for NCOC (Period: Jan 2015 – Jan 2016)
Scope: The EPC 2, 3, and 4 Contract includes Engineering, procurement, fabrication,load-out, and transportation of topsides for EP Clusters 2, 3, and 4.
Project 3:
TCO FGP (Period: Jan 2016 – Aug 2018)
Scope: The Project consisted of the fabrication and erection of 75 PAR’s (55.000tons of rack) and 8 K skids and 73 stair towers that were executed at
ERSAICaspian
Yard
or
at Fabrication Subcontractor’s Yard.
SNC-LAVALINE GROUP INC. UAE
Project 1:
Emal Aluminum Smelter Project (Period: Jan 2012 – Oct 2012)
Scope: The project includes Detail Engineering, procurement, fabrication, and installation.
GRIFFIN ENERGY SANA'A, YEMEN
Project 1:
Oil Gathering Station, Oil production unit Up-gradation (Client: TOTAL,Kharir)
Scope: The project includes Detail Engineering, fabrication, and installation.
Project 2:
Construction Support at CPU, (Client: TOTAL, Kharir)
Scope:
Detail Site Engg., Construction & Commissioning
Project 3:
Upgrade Wastewater System Southern Area Operation-(Client: YLNG, Balhaf)
Scope:
Detail Site Engg. Construction & Commissioning.
GULF PETROCHEMICAL SERVICES & TRADING LLC, MUSCAT – OMAN
Project 1:
MCD Phase II & AL-Khalata Phase III, MARMUL (Petroleum DevelopmentOman), OMAN/ Client: PDO, Marmul)
Scope: Detail Site Engg.,Construction & Commissioning
Project 2:
Murayrat - Barka, Rusayl Junction-RPP Loop Lines& Barka GSS (Oman GasCompany) OMAN / Client: OGC, Muscat
Scope: Detail Site Engineering, Construction & commissioning.
Project 3:
South Oman Pipeline Expansion (Oman Gas Company) OMAN / Client: OGC, Salalah
Scope: Detail Site Engineering, Erection & commissioning.
TRAINING
1 Month Instrument Design training with Intergraph’s Smart PlantInstrumentation V (7.0) in 2008 from Monarch Engineering IT Solutions Pvt.Ltd, Mumbai, India.