EXECUTIVE SUMMARY/QUALIFICATION:
Conceptual, Feed and Detailed Engineering, Project execution, Engineering support and Project management consultancy of Electrical Power Distribution Network /System for a wide variety of industrial projects like Oil and Gas Upstream and downstream projects, Petrochemical, Petroleum, Refineries, Crude Oil Production Facilities/Tank Farms, NGL Plants, Bulk Plants, Oil & Gas Separation Plants and 132Kv,33Kv AIS and GIS substation Distribution system and switchgears etc
Graduate in Electrical Engineering in 1992
Diploma in Electrical Engineering in 1988.
EXPERIENCE
(23Yrs in Oil &Gas, Petroleum, Refinery, Bulk Plants, Tank Farms, Infrastructure Projects)
OVERALL DUTY&RESPONSIBILITY
? Responsible for Feed, Detail design & Engineering, Control and monitoring of project progress, including Manpower control and schedule Monitors and manages the works carried out by Engineers.
? Preparation of Cost to resources for the Feed and Detail design project.
? Work with the engineering teams and producing electrical engineering deliverables for projects.
? Contribute to the design and engineering solutions, produce detailed designs deliverables and documents. Prepare deliverables to meet specific project requirements including Review and approval of Design Deliverables, Electrical design basis document.
? Electrical Design Philosophy
? Electrical Load Lists
? Electrical equipment sizing calculations
? Equipment data sheets
? Generation capacity calculations
? Single Line Diagrams and control schematic diagrams.
? Cable Sizing Calculations, Cable schedules and route
? Panel board and distribution boards schedules
? Substation Layouts
? Lighting Calculations and Layouts
? Lightning Protection Calculations and layouts
? Earthing and Grounding calculations and layouts
? MV and LV Switchgear Specification
? Power Transformer Specification
? Power and Control Cable Specification
? Electric Motor Specification
? Standby Diesel Generator Specification
? AC/DC UPS Specification
? VFD and Soft starter specifications
? Lightning Protection System Specification
? Interconnection Schedules, Tie in schedules, I/O list/Schedules for IMCS /EICS system including block diagram etc
? Standard Installation Drawings for cable, tray, earthing and lighting system etc.
? Hazardous Area Classification in accordance with HAC schedules.
? Preparation of MTO for Bulk Materials
? Preparation of Material Requisitions for Electrical equipment and materials.
? Prepare and raise Technical query request to vendors,
? preparation of Technical bid evaluation /summary sheet,
? Vendor drawings and documents review for Electrical equipment’s like Transformers, HV and LV switchgear, motors, UPS, Generators, Cables & Battery set to ensure vendor equipment specifications shall meet with client requirements and international codes and standards.
? Conduct Load Flow, Short Circuit, Motor Transient Studies on ETAP software.
? Supervise Junior Engineers’ work and train / develop them Checking of CAD designer’s work for accuracy and correctness
? Provide assistance to Lead Engineer in conducting site surveys, development of budgets and Cost Control Resource
? Evaluate designs done by others and prepare reports. Prepare minutes of meeting. Prepare and deliver presentations of engineering designs
? Check the technical completeness and correctness of work done by other engineers
? Checking of plot plans; organize the issuance of engineering drawings and technical documents for Inter-Discipline Checks review and comment of IDC from other disciplines in coordinate with other engineering discipline in integration of technical data inputs.
? Organize Design review meeting and close outs, Participate Constructability review and 3D-Modelling.
? Participate in design review meeting and closeouts, Constructability review and 3D-modelling.
? Coordination of various bodies like client, consultant, vendor, contractor etc.
? Preparing of tender packages related to technical scope of work for DD and construction work for the projects.
? Provide assistance in Commissioning and Start- up Assistance.
? Construction support like site query problem if any arise during construction regarding Electrical items and furnish a final as built drawing for all system.
PREPARATION OF TECHNICAL PROPOSAL PACKAGES
? Review of Invitation to Bid (ITB) documents during proposals, organize the preparation of the Technical Document Register (TDR) and identify the requirements and scope of work; review specifications and Data Sheets, Plot plans, General Arrangement drawings, Area Classification Drawings and other relevant documents. Identify and resolve discrepancies and divergences from original proposal through the raising of technical queries to projects/client, review of tender bulletins /clarification from client, preparation of project execution methodology, feed endorsement or verification report and qualifications for bid submittal.
? Verify scope of work, budgeted man hours, no of deliverables, time schedules and other specifications for execution of the work. Monitor man-hour costs and time schedules. Recommend cost effective measures to reduce the overall package costs.
PMC WORK
? Perform Project Management Consultancy (PMC) services in the role of Electrical Engineer for oil & gas and petrochemical projects. The responsibilities shall include the review of Engineering Contractor’s design work / deliverables and provide necessary comments / approval, while fully meeting COMPANY’s requirements by assuring quality deliverables in a timely manner
? Provides inputs to line manager on change orders and ensure safe, economical and technically sound decisions.
? Provides technical / expert support for projects various activities, including bids evaluation, review of pre-qualification of Subcontractors / Contractors, Vendors or Suppliers, commissioning and handover of project facilities to end-users, etc.
? Identifies areas of improvement for the design contractor and articulate an action plan with the involvement of both the project engineer and the design contractor representative.
? Provides technical advice and support to the operation group, in order to ensure that the plants integrity and long term availability are maintained, areas of concern are identified by the appropriate party and optimum / cost effective solutions are adopted.
? Follows up with Contractor’s planning and progress on daily basis.
? Provides technical support to resolve pending / outstanding issues.
? Coordinates with the Core Team, Company, Contractor and other disciplines, as required.
? Adheres to Company HSE policy, procedures, regulations and objectives as they relate to area of responsibility. Ensures that work undertaken is performed in a safe and environmentally sound manner.
? Participates in various workshops and associated closeouts, e.g. Design Review, 3D Model Review, HSE Studies, Constructability Review, etc.
? Participates in vendor drawing reviews and assists in resolving technical issues raised during FAT/SAT testing.
? Ensures safe, economic and technically sound decisions related to area of responsibility.
? Assists in resolving field engineering queries during construction phase.
? Verifies of scope of work for any new modifications, new packages and review Contractor’s proposals.
? Provides on-site engineering consultation, as applicable, during construction, pre-commissioning and commissioning stage; full involvement during performance test run for the plant.
? coordinates, supervises and evaluates technical studies and special investigations carried out by third party (such as Cathodic Protection Calculation, Harmonic Study, Stability Study, Insulation coordination Study, etc.), including integrity verification, assessment for integration with existing system for any possible upgradation of existing electrical facility.
? Identifies areas of improvement for the design contractor and articulate an action plan with the involvement of both the project engineer and the design contractor representative.
? Provides technical advice and support to the operation group, in order to ensure that the plants integrity and long term availability are maintained, areas of concern are identified by the appropriate party and optimum / cost effective solutions are adopted.
? Follows up with Contractor’s planning and progress on daily basis.
? Provides technical support to resolve pending / outstanding issues.
? Coordinates with the Core Team, Company, Contractor and other disciplines, as required.
? Ensures safe, economic and technically sound decisions related to area of responsibility.
? Reports on Engineering Contractor’s work to line manager.
? Electrical Engineer Overseeing Engineering Contractor’s works during FEED and Detailed Engineering stages.
KEY PROJECTS & POSITION HELD
CHINA PETROLEUM ENGINEERING-DUBAI
Sr. Electrical Engineer (Nov’2013 - April 2020)
? EPC for BAB INTEGRATED FACILITY DEVLOPMENT in which involves power supply to PSS Skids located at RDS, Main pad, Mini pad, Water injection clusters & Well-bays.
The main equipment’s involved for engineering, design, procurement and construction of BAB project:
33/3.45 kV, 4MVA ±10% with 1.25% steps OLTC Power Transformers. 3.3/0.433 kV, ±5% with 2.5% steps OCTC Distribution Transformers. Substation control and monitoring system (SCMS) interface panels to transfer signals to BAB LDC through OHL network, 33Kv GIS Switchgear, 3.3kV Air Insulated Switchgear with Bus coupler, 415 V Switchgear with Bus section, 415V, 3phase, 4 wire Bus duct, 415V Emergency Diesel, 240 V AC UPS system, 110 V DC UPS system, Lighting and small power Distribution Boards, HVAC Switchboard and control panels, Fire alarm and HSSD system
? EPC project constituting Detail design and project execution of CS8 GAS COMPRESSION PROJECT and UMQASR Storage terminal project for SHELL-BGC IRAQ Which involves installation of 11Kv Switchgear,3.3Kv switchgear,400V LV switchgear, Power Transformers, AC/DC UPS, MOV, MV/LV Motors, Lighting and Earthing system in concrete Substation etc.
? Detail Design for EPCC of Oil Gathering Facilities (Phase 1 – Offsite 3) by EPC Contractor M/S GRAND Energy, For PETRONAS Carigali Iraq Holding B.V. Garraf Operations. The project involves power supply for drilling of new oil rigs for well pads -28(Typical). Power supply to well pads involves construction of new Substation building with, Distribution Transformers, LV switchgears, Emergency diesel generating sets,AC UPS System,IMCS system, Lighting, earthing and lightning protection system etc.
? Detail Design and Engineering of Gas compression system at West Qurna, IRAQ for BASHRA Gas Company &SHELL.
? Feed for PETRO CHINA HALFAYAH (Operating Company) project for surface facility development at IRAQ. The project involves power supply to downstream projects for crude oil processing Trains, water injection system and Gas compression system. The electrical work involves power supply to 33kV switchgears,33/6.6kV power transformers,6.6kV switchgear, 5.5 MW HP&LP Compressors, SD Drives, Stabilized compressors ,400V Low voltage switchgears, AC UPS,DC UPS,EICS system, Diesel Generators, Lighting ,Earthing and lightning protection system etc.
? EPC of water management project at PETRONAS CARIGILI GARAFF FIELD development project, IRAQ.
The power supply involves 33kV supply to facilities at 33kV switchgears 33/11kV,50MVA Transformer & and stepped down to 6.6kV through 33/6.9Kv,10MVA Power transformer, 33kV power supply through Underground cable to 11kv&6.6kV switchgear, 6.6kV Motors, 6.6/420V Auxiliary transformer. Installation of AC UPS, EICS system, Lighting and Earthing system, Emergency Diesel generator set and LV switchgears, Indoor substation building etc.
LITWIN PEL ENGINEERING, ABUDHABI
Sr. Electrical Engineer (May’2013 - Oct’2013)
NGL Pipeline Project GASCO at ASAB-0 ABUDHABI.
? Detail Design and Engineering for NGL Pipeline Project at ASAB-0, which involves modification of existing 11kV switchgear, Installation of new 11 kV Switch Gear, VFD Panel, Phase shifting transformer, 1150kW Motors, Power Transformer, 415 V Switch Borad,IPCS system for MV & LV ,240V AC UPS,110V DC UPS, cable laying & termination for 11 kV, 3.3 kV, 415 v cable. Earthing and lighting layout
CH2M HILL-VECO Engineering, ABU DHABI
Sr. Electrical Engineer (Jan’2013 - April’2013)
GARRAF final field Development (GFFD) project, PETRONAS CARIGALI.
? Front end engineering Design work and pre-award activities for GARRAF final field development (GFFD) project, which involves phase-1 & 2 for development of new well pads & power supply to Third water river intake facility, GIFT water treatment and water injection facility, Produced water upgrade facility and power supply to mishriff common utility.
The power supply involves 33kV OHL power supply to all of the above facilities at 33kV switchgears and stepped down to 6.6kV through 33/6.9kV Power transformer, power supply to 6.6kV switchgear, 6.6kV Motors, 6.6/420V Auxiliary transformer. Installation of AC UPS, EICS system, Lighting and Earthing system, Emergency Diesel generator set and LV switchgears, pre-fabricated substation building etc 240V AC UPS,110V DC UPS, cable laying & termination for 11 kV, 3.3 kV, 415 v cable. Earthing and lighting layout
Worley Parsons Engineering LLC, OMAN
Senior Electrical Engineer (March’2011 -Jan’2013)
Senior Electrical engineer for OMAN Petroleum Company, Petroleum Development Oman and Oman refinery and petrochemicals for the following projects:
? Detail design for OMAN OIL development project.
? The project involves distribution of power supply to off plot well head sections. The work also involves tapping of power supply from 33kV OHL feeders and stepping down to distribution level for the power supply of UDBs and outgoing feeders for SIS panels, Hydraulic panels and other instrument power supply. Equipment layout, earthing layout, lighting layout of well pads etc.
? Front End Design and Detailed Design for Sahma booster Pump – Station Upgrade Project of PDO.
The scope includes installation of Electrical equipment associated with new booster pump, Unit transformer, NER and switchgear panels and providing power supply to them. It includes preparation of engineering design calculations, requisitions, MTO, drawings & construction scope of work for the project. The scope also includes vendor drawing review of various equipment for the project viz. 132/11.5kV, 8MVA unit transformer with OLTC & RTCC panel; NER, capacitor bank, 11kV switchgear, 5.55MW Motor, Motor Control & Relay Panel, etc.
? Front End Design for Sadad Deep Water Disposal Project of PDO.
The scope includes Electrical works to provide power supply for new 1200kW DWD pump motors. It includes new 10/12.5MVA 33/6.9kV ONAN/ONAF Unit transformers, 6.6kV & LV switchboard modification, 33kV switch rack extension, 33kV Circuit Breaker and associated C&R panels.
? Detailed Design for Sayyalha 26 pipe line rationalization project.
? Detail design for Installation of PMR’s & on field Isolators with the extension of the 33kV OHL feeding the wellheads for pipeline protection and providing power supply to MSVs & other instruments in the field.
? Design & Detail Design for NIMR rationalization project
The project involves infrastructure development of NIMR NGS substation. The work involves detail design for 33/6.9KV,25 MVA Transformers,33KV cables,6.6KV Cables, Motors, NERs,6.6KV switchboards and outgoing loads, System studies like Load flow, SC study, Motor starting studies using EDSA software.
? Detail Design for WWTP Plant expansion in Equate, Kuwait
Project involves modification of existing 3.45kV switchboards, Installation of Transformers, cables, MCCs, Motors, lighting and earthng system.
CONSOLIDATED GULF COMPANY, DOHA, QATAR
Lead engineer (March’2008-March’2011)
Lead design engineer and is responsible for designing of Electrical systems including for Detail, Feed and conceptual engineering design packages in accordance with industry and Qatar petroleum standards for Qatar petroleum projects.
Feed for installation of power factor improvement project at Dukhan 33 kv Electrical network.
The study of instrument air compressor at Gas Distribution Station B, E, F & G, Gas operation, Mesaieed. Qatar Petroleum.
? FEED for installation of fire water rings at Gas Distribution systems at stations W1& W2 at mesaieed .
? Engineering Consultancy services for study of 33kV electrical network in Dukhan field.
? Feed for Impressed current cathodic protection for STP tanks at Dukhan.
? Detail design for construction of tool and Technician building for NGL 3&4 at Mesaieed .
? Feed for SCS/SCADA for Electrical distribution system in Dukhan.
? Feed for Lube oil cooling system for crude oil loading pumps.
? Up gradation of Kathiya main, Kathiya south and Kathiya north de-gassing stations.
? Updating of Hazardous area classification drawings in Dukhan and mesaieed field.
DAR AL-RIYADH CONSULTANTS, AL-KHOBAR, SAUDIARABIA
Electrical Design Engineer (March’2006-April2008)
? Electrical Design Engineer for Conceptual, Feed and Detailed Engineering, packages for Oil and Gas, Refinery (Saudi ARAMCO) and Petrochemicals (SABIC)
? GAS and oil Separation project for Saudi Aramco & Up gradation of control Building at ABQUAIQ GOSP II.
? Up gradation of Rabigh Bulk plant. In Rabigh Saudi Aramco (KSA).
? Replacement of compressor with associated modification ,switchgears ,cables and
? control panels for SABIC, Riyadh.
? Installation of new air supply system at Dhahran Bulk Plant.
? Electrical heat tracing for compressor pipe line at Al-Haradh GOSP-11.
Al Toukhi Company for Industries -An EPIC Contracting Company for Industries Riyadh, Kingdom of Saudi Arabia
Electrical Engineer (August’2003-March’2006)
? EPC for Shoquiya (110/13.8kv GIS) substation at Saudi Electricity company, KSA.
? EPC for Al- Muhayil S/S (132/33 kV Outdoor S/S) Southern zone Saudi Electricity, KSA.
? Indoor and outdoor equipment layout, plan & sections
? Preparation &checking of SLD, Relay metering Dwg
? Reviewing of protection & control schematic drawings of suppliers.
? Cable sizing calculations cable schedules an Interfacing of Relay/ control
? panels with Switch gears.
? Design calculation of substation earthing & Equipment earthing layouts etc.
? Battery and charger sizing Calculation.
? Designing of lighting circuits, calculations an Layouts for indoor and outdoor substations.
? CT/PT Sizing Calculation.
? Tubular bus bar sizing calculation.
? Review of Vendor drawings and Documents to ensure their compliance with specifications as per the PTS And contract documents &Preparing of work Schedule.
? Experience in dealing with engg.consultants&end Clients.
? Experience in co-coordinating with site activities/client tech.support.
? Preparation of Material take-offs and List of deliverables.
MOC Engineering-UAE
Electrical engineer (Dec’2000 - August ‘2003)
Detail Design, procurement and construction of Chemoil Project Oil Terminal-1&2 Project Fujairah, consists of Fuel oil, Gas oil & Jet oil with total storage capacity of 580,000 cbm with 21 nos tanks, heating coil & Blending for associated pipelines, pumping stations etc. Oily water separator, Utility air system, 33/6.6kV substation, 6.6/.415kV substation.
Detail Engineering Deliverables like Electrical Specifications, Datasheets, MRs, Design Calculations, Layout Drawings and Single Line Diagrams. Vendor Engineering Deliverables Like GA, SLD, Schematics/ Control wiring Diagrams and Plant Package.
Assistance to Procurement to finalize the major long lead materials and provide Technical bid evaluation reports etc.
Project Execution - Supporting role for Construction/Execution team by providing engineering solutions.
United phosphorus Limited Projects Division Ankleswar, Gujarat (INDIA)
Electrical Engineer (Jan’1994-June’1999 )
Feed and detail engineering of expansion projects for chemical & pesticide plants.
Preparation of deliverable lists, Planning, scheduling, executing Project implementation & execution of HT/LT Switchgears, control panels, Transformers, SF6Circuit Breakers, CT/PT, Power control centre, Motor control Centre, D.G set, Boiler, Utility and Lighting distribution system. Plant
Earthing, Substation earthing, cable laying, plant lighting.
Ensuring that equipment supplied are in compliance with approved & pre-set technical specifications.
Preparing commissioning schedules in coordination with equipment supplier, erection agency, testing and commissioning team to match with the project completion plan.
Material takeoff and floating of RFQ (Request for quotations).
Project Handled:
? Feed for installation of utility power supply Instrument air compressors, KC-93&12 & lighting & earthing for for utility building and equipments.
? Detail design for Solvent recovery plant which involves power supply for reactors, transfer pump motors, earthing o& lighting of plants.
? Detail design for WP expansion project.
? Detail engineering for power supply to Effluent treatment plant with expansion of new MCC.
? Feed for earthing & lighting power supply to finished go down, canteen etc.
? Feed for expansion of Mancozeb plant and utility power supply.
? Engineering services for lighting and power supply to administration building, chilling plant etc.