Girish Swami
Mechanical Engineer
Mobile: +91 8766779370
Mail: girishswami4345@gmail.com
About Me:
I am Safety, Quality and Cost-conscious Mechanical Engineer with over 15 years of Mechanical Maintenance experience in the Petrochemical and Chemical Industry.
I am currently working as a Planning Engineer at the Central Planning Department, Reliance Industries Limited, Nagothane Manufacturing Division, Nagothane, Maharashtra, India.
I was responsible for Mechanical Maintenance of 100000 TPA Methanol Plant, 7200 TPD Air Separation Plant and 85 MW Cogeneration Captive Power Plant during previous Job roles.
I have performed equally well in the Mechanical Maintenance, Maintenance Planning, Budgeting and Inventory Management.
I have working exposure to SAP PM, SAP MM Modules and working knowledge of SAP FICO Module.
Domain Experience:
1. Mechanical Maintenance of 85 MW Cogeneration Captive Power Plant, 7200 TPD Air Separation Plant and 100000 TPA Methanol Plant.
2. Routine, Preventive and Major Maintenance of Rotary and Static Equipment.
3. Asset Failures and Abnormalities Investigation.
4. Maintenance Calendar, Maintenance Planning, Spare requirement finalization and Annual Maintenance Budgeting.
5. Inventory Management and Inventory Level setting.
6. SAP Master Data Management related to Equipment, Equipment Bill of Materials, Functional Location, Maintenance Items and Maintenance Plans.
7. Preparation of Standard Maintenance Practices for Rotary and Static Equipment.
8. Material and Services Requisitions and Vendor Quotes evaluation.
Software:
1. Microsoft Project.
2. Primavera P6.
3. AutoCAD.
Trainings:
1. Mechanical Seals.
2. Reciprocating Compressors.
3. Multistage Centrifugal Compressors.
Shutdown Experience:
2005
Reliance Industries Ltd.
PSV Testing and Calibration, Control Valves replacement, Fin Fan Cooler Maintenance.
2009
Deepak Fertilisers and Petrochemical Corporation Ltd.
Piping Fabrication Jobs.
2015
Reliance Industries Ltd.
Steam Turbine Overhaul, Low Alloy Steel Steam Piping Fabrications.
2017
Reliance Industries Ltd.
Rotary Equipment maintenance, Rubber Lined Piping loops replacement.
Equipment Major Maintenance Experience
1. Gas Turbine: GE Frame V, 20 MW, PG5361P.
a. Combustion Inspection, Hot Gas Path Inspection and Major Inspection.
b. Fuel Nozzle Servicing.
c. Load Gear Box and Accessory Gear Box Overhauls.
d. Train Alignment.
e. Refurbishment of Spares.
2. Steam Turbine: Siemens, 25 MW, VE50.
a. Major Overhaul.
b. Load Gear Box Overhaul.
c. Train Alignment.
d. Guide Blade Carriers Refurbishment.
e. Rotor Refurbishment.
3. Steam Turbine: Siemens, 4 MW, HNK 28/25.
a. Front Bearing Pedestal Sliding Surface Correction.
b. Major Overhaul.
c. Guide Blade Carrier Refurbishment.
d. Rotor Refurbishment.
4. Reciprocating Compressor: Kobe Steel, 4000 NM3, KJA2.
a. Major Overhaul.
b. Cylinder Liner Replacement.
c. Piston Rod Refurbishment.
5. Boiler Feed Water Multistage Centrifugal Pump: Ingersoll Rand, CB 12X 10.
a. Major Overhaul.
6. Boiler: Balke Durr, 136 TPH, 105 Bar.
a. Annual Inspection and Hydro testing.
b. Burner Maintenance
c. Boiler Expansion Measurement.
d. Flue Gas Fabric Expansion Joints Replacement.
e. Flue Gas Metallic Expansion Joints Replacement.
7. Forced Draft Fan: Solyvent Ventec : 119000 KNM3/hr, 380 mmWC.
a. Rotor Replacement.
b. Inlet Guide Vane Maintenance.
Projects :
1. GE Frame V Gas Turbine Uprate for 10% Power Output Increment and 3% Heat Rate Reduction.
-Hot Gas Path Spares Metallurgy and Design Modifications.
-Cooling and Sealing Air System Modifications.
-Compressor Bleed Air Seal Modification.
-Rotor Inactive Thrust Bearing Modification.
Responsibility: Spares Inspections and Monitoring Field Execution.
2. Balke Durr 136 TPH, 105 Bar Boiler Pressure Parts Revamp.
-Economiser Module Replacement.
-Superheater 1 and 2 Coils and Header Design Modification.
-Steam Drum to Mud Drum Bank Tubes Replacement.
Responsibility: Drawing and Details provision, Inputs in the Technical Discussion and Pressure Parts New Drawing Review.
3. Kobe Steel 2 stage Double-acting Reciprocating Compressor Non Lubricated Liner Development & Liner Replacement.
-Alternate Vendor Development for Cylinder Liner.
Responsibility: Vendor Drawing Review, Coordinate between Vendor and Rotary Reliability Group for Drawing and QAP Finalisation. Codification and Procurement. Field Execution.
4. Provision of Overhead Tank Lube Oil System for Steam Turbine.
-Overhead Tank Sizing.
-Hook up Scheme with Existing Lube Oil System.
Responsibility: Drawings and Details provision. Coordinate between Vendor and Rotary Reliability Group for Sizing, Drawing, Scheme and QAP Finalisation. Initiate Management Approval for MOCT and Procurement.
Work Experience:
Engineer Trainee
October 2003 - August 2004
Greaves Cotton Limited.
Manager
August 2004 - April 2009
Reliance Industries Limited.
Deputy Manager
April 2009 - July 2011
Deepak Fertilisers and Petrochemical Corporation Limited.
Associate Manager
July 2011 - September 2012
Jindal Praxair Oxygen Company Private Limited.
General Manager
September 2012 - December 2018
Reliance Industries Limited.
Associate General Manager
January 2019 - January 2020
Peak Infrastructure Management Services Private Limited.
Senior Planning Engineer
Since February 2022
Reliance Industries Limited.
Qualification
Bachelor of Technology
Dr. Babasaheb Ambedkar Technological University, Lonere, Maharashtra, India.
Passing Year 2003
Passport Number: Z7133506.
Marital Status: Married.
Present Address:
House Number BN 102,
Reliance Petrochemical Township,
Nagothane, Taluka Pen, District Raigad, Maharashtra. 402125
Permanent Address:
House Number 5, Building Number E14,
Sai Mahal CHS, Sector 48,
Nerul, Navi Mumbai. Maharashtra. 400706.